Semi-Automatic Dual Cartridge Filling Capping Machine for 250ml 10:1 High-viscosity Adhesives | WEFILL-CAR-F005
AB Two-Component Filling and Capping Machine
- Machine Model:WEFILL-CAR-AB-F005-250-10-1
- Applicable Liquid Volume Ratios:10:1,also can customized 1:1,,2:1,3:1,4:1,5:1 to 20:1,etc.
- Applicable Filling Volume:250ml,also can customized:50ml&75ml&490ml-1500ml,etc.
- Filling Speed:200-300pcs/hour(250ml,10:1)
- Machine Voltage:220V/1Phase/50HZ or Customized Your Country Voltage
- Machine Working Air Pressure:0.4–0.7 MPa
- Feeding Platen Size:20L(5gallon)Pressing Plate;also can configure:200L(55gallon)
- Applicable Viscosity:10000 to 1000,000 cps,High Viscosity Paste Adhesive
- Dispensing Accuracy:±1%
WEFILL-CAR-AB-F005-250-10-1 Semi-Automatic 250ml 10:1 Dual Cartridge Filling Capping Machine
Product Overview
The WEFILL-CAR-AB-F005-250-10-1 is a semi-automatic dual cartridge filling machine engineered for precise, bubble-free filling of two-component adhesives into 250ml (10:1 ratio) cartridges. It is an ideal solution for manufacturers seeking a reliable, cost-effective alternative to fully manual filling or expensive automated systems.
Working Principle
The WEFILL-CAR-AB-F005-250-10-1 semi-automatic dual cartridge filling machine is designed for efficient and precise filling of two-component adhesives into 250ml (10:1 ratio) dual cartridges.
Operation Process:
Material Loading – A standard 5-gallon (approximately 20 kg) pail of adhesive is placed onto the platen base.
Material Feeding – The platen presses down and feeds the adhesive material directly to the adhesive pump, ensuring a smooth and consistent supply.
Ratio Control & Metering – A servo motor drives the metering pump in a synchronized manner to precisely control the mixing ratio and delivery volume of the two adhesive components.
Cartridge Filling – Working in conjunction with the automatic cartridge fixture, the machine injects the adhesive into the dual cartridge with high accuracy.
Key Design Advantage:
The machine is specifically engineered to fill adhesive from the rear end into 250ml 10:1 ratio cartridges. This rear-filling design effectively prevents air bubbles from forming during the filling process, significantly reducing the need for downstream de-aeration (defoaming) and improving both product quality and production efficiency.
【Key Features & Advantages】
Why Choose the 250ml/10:1 Specialized Model?
1.Precision Control for High Ratios (10:1)
The servo-driven precision gear pump system ensures that even with a 10:1 mix ratio (customizable from 1:1 to 20:1), the A/B component accuracy remains within ±1%, eliminating quality issues caused by ratio deviation.
2.Clean & Efficient Platen Feed System
The 20L (5-gallon) press-plate feeder directly presses material from the original pail, enabling sealed, bubble-free supply. This design drastically reduces air entrapment and contamination—critical for high-viscosity pastes.
3.User-Friendly Operation & Fast Changeover
The Siemens 7-inch touchscreen HMI allows tool-free adjustments to fill volume and speed. The rear-mounted automatic lifting device enables independent loading and unloading of 250ml cartridges, significantly reducing downtime during batch changes.
4.Anti-Drip Dispensing Head
Equipped with a dual-action vacuum back-suction dispensing head that effectively prevents material dripping or stringing after each fill cycle, keeping the work area clean and reducing material waste.
Need a custom configuration? We offer variable ratios (1:1 to 20:1), custom volumes (10ml to 1500ml), and ATEX explosion-proof options. Contact us with your requirements.
| Type: | WEFILL-CAR-AB-F005-250-10-1 |
| Voltage: | 220V/1Phase/50Hz; |
| Power: | 2-3.5kw; |
| Working Air Pressure: | 0.4-0.7 Mpa; |
| Feeding Method: | 5 Gallon/20 liters Pressure Plate--Suitable for supplying high-viscosity paste materials; |
| Control Method: | Siemens PLC + HMI; |
| Applicable Ratio: | 10:1,1:1-20:1 Customizable,Commonly used ratios are: 1:1; 2:1; 3:1; 4:1; 5:1;10:1; |
| Suitable Cartridges: | 250ml;can customized:10-1500ml, Like:12ml,24ml,50ml, 75ml, 200ml,400ml, 490ml,600ml, 1000ml,etc; |
| Viscosity Range: | 10000-1000000cps, high-viscosity paste adhesives |
| Filling accuracy: | ±1%; |
| Filling speed: | 240-300pcs/hour(250ml,10:1) |
| Machine Size: | L1300mm*W1200mm*H1800mm,For reference only; |
| Machine Weight: | 400KG |
| Machine Frame | Equipped with steel surface coated frame and swivel casters for easy mobility or secure positioning. |
Filling Process Flowchart
Machine Configuration – Front Side
The front side of the machine is equipped with the following core components for intuitive operation and precise control:
1. Siemens PLC Programmable Controller – Featuring a Siemens 7-inch capacitive touchscreen HMI for setting dispensing ratio, volume, and speed, as well as monitoring and displaying real-time machine status.
2. Airtac Precision Solenoid Valves – Control the opening and closing of the dispensing head and manage the operation of all pneumatic components for reliable and responsive performance.
3. A/B Material Pressure Regulation System – Equipped with independent A and B material pressure regulating valves and pressure gauges, allowing precise adjustment of material feeding pressure and ensuring stable two-component dispensing.
4. Emergency Stop & Control Interface – Includes a master emergency stop switch, foot-operated electric switch for hands-free operation, and manual/semi-automatic mode selector for flexible workflow adaptation.
5. 2 Sets of Precision Wear-Resistant Gear Metering Pumps – Specifically designed for metering and transferring liquid adhesives or materials with high accuracy and durability.
6. 2 Sets of Xinje Motors & Drives – Allow stepless adjustment of dispensing ratio, precise control of dispensing speed, and programmable setting of fill volume per cycle.
7. Precision Cartridge Filling Fixture& Cartridge Piston Pressing Fixture
Customized filling fixtures ensure accurate positioning and quantitative filling:250ml 10:1 AB cartridge filling fixture ×1
Customized piston pressing fixtures included:250ml 10:1 AB cartridge piston pressing fixture ×1
8. Dual-Action Suction Dispensing Head (250ml 10:1) – Controls separate A/B material output and shut-off. The mixing head is equipped with multiple seals to create a vacuum back-suction effect, effectively preventing material dripping and minimizing stringing after dispensing stops. (Note: For high-viscosity materials, some stringing may still occur and is considered normal.)
Machine Configuration – Rear Side
Rear View – Material Feeding & Automatic Cartridge Loading System
The rear side of the machine is designed for stable adhesive supply and automatic cartridge handling, improving production efficiency and reducing manual operation.
1. Dual 20L Pressure Disc Feeding System
Equipped with two sets of 20L standard pressure plates, compatible with 20L straight-side drums, suitable for continuous feeding of two-component adhesive materials.
2. Precision Lifting Cylinder System
Equipped with four precision lifting cylinders to ensure balanced pressure plate movement, smooth material pressing, and stable feeding performance.
3. High Viscosity Adhesive Metering Pump System
Equipped with two sets of wear-resistant metering feed pumps, specially designed for conveying high-viscosity paste adhesives and industrial materials.
4. Servo Motor Drive System
Equipped with two sets of servo motors and matching gear reducers to provide stable power output and ensure high-speed, accurate material dispensing.
5. Stable Material Flow Control
The feed pumps are driven by pneumatic cylinders to maintain stable material flow rate and achieve high-precision metering performance.
6. Industrial-Grade Transfer Pipeline
Equipped with explosion-proof, corrosion-resistant, and high-temperature-resistant material pipelines, suitable for demanding adhesive applications
7. Main Pressure air inlet Valve
Equipped with a main air inlet filtration and lubrication unit (FRL system), which filters moisture and impurities from compressed air while providing lubrication for internal pneumatic components.
8. Stainless Steel Machine Cabinet
Integrated stainless steel electrical cabinet with universal leveling casters, providing durability, easy movement, and convenient installation.
Optional Features for Customized AB Adhesive Filling Solutions
Additional configurations and customized solutions are available according to different adhesive characteristics, production Process, and application environments.
1. Constant Temperature Heating System-Optional Heating Module for Temperature-Sensitive Materials
● Available for adhesives requiring temperature control during the filling process.
● Maintains consistent material viscosity and improves filling accuracy and stability.
● Helps ensure smooth material flow for temperature-sensitive products.
2. Customized Mixing Ratio & Filling Capacity-Flexible AB Ratio and Filling Volume Solutions
● Supports various two-component adhesive mixing ratios, including 1:1, 2:1,3:1, 4:1,5:1,10:1, and other customized ratios.
● Filling volume can be customized according to different cartridge sizes, packaging formats, and production requirements.
● Suitable for 25ml,50ml, 75ml, 200ml, 250ml, 400ml, 490ml ,600ml,800ml-1500ml cartridges.
3. Large Platen Supply System-200L (50-Gallon) Drum Material Feeding Upgrade
● The material supply system can be upgraded with a large platen system compatible with 200L / 55-gallon drums.
● Designed for continuous adhesive feeding in high-volume production.
● Reduces manual material handling and improves production efficiency.
4. SUS316 Stainless Steel Contact Parts Upgrade-Enhanced Corrosion Resistance for Special Materials
● Material-contact components can be upgraded to SUS316 stainless steel.
● Recommended for chemically sensitive, high-purity adhesive applications.
● Provides improved durability and longer service life under demanding conditions.
5. Explosion-Proof System Upgrade-Safety Upgrade for Hazardous Production Environments
● The complete machine can be customized with an explosion-proof configuration.
● Suitable for applications requiring enhanced safety protection in hazardous or special working environments.
● Provides safer operation when handling flammable or sensitive materials.
Send Your Inquiry Now
Compatible Materials & Applications
Wide Range of Two-Component Adhesive Materials
The WEFILL-CAR-AB-F005-250-10-1 Semi-Automatic High-Viscosity Paste AB Adhesive Filling & Capping Machine is designed for precise filling of a wide range of two-component adhesives, epoxy resins, and Low-viscosity materials.
Compatible materials include:
● Epoxy resins; ● Two-component polyurethane (PU) adhesives; ● Acrylic adhesives (MMA); ● Silicone adhesives and sealants; ● Structural adhesives; ● Stone panel adhesives; ● Grout sealants; ● Rebar anchoring adhesives; ● Casting compounds; ● Cyanoacrylates; ● Greases and lubricating pastes; ● High-viscosity sealants; ● Other customized two-component chemical materials; ● Cow Adhesive etc.
Applicable Industries
The machine is widely used in industries requiring accurate ratio-controlled filling, clean packaging, and reliable dispensing performance, including:
● Electronics manufacturing; ● Electrical appliance manufacturing; ● Medical device and healthcare industries; ● Food processing and packaging applications; ● Construction and civil engineering; ● Automotive manufacturing; ● Aerospace applications; ● Photovoltaic (solar energy) industry; ● Machine building and industrial equipment; ● Mobile devices and wearable electronics; ● In-vitro diagnostics; ● Animal healthcare products; ● Gift, decoration, and craft industries; ● Stone and panel processing; ● Fluid packaging and industrial chemical packaging; ● Defense-related applications
Compatible Adhesive Brands
The WEFILL-CAR-AB-F005-250-10-1 filling system is compatible with many internationally recognized adhesive brands, including:
● 3M; ●Henkel (LOCTITE); ●Huntsman Corporation; ●H.B. Fuller Company; ●Permabond Engineering Adhesives; ●ITW Performance Polymers; ●Master Bond Inc.; ●MG Chemicals; ●DELO Industrial Adhesives; ●Other industrial adhesive and sealant manufacturers.
Typical Applications:
AB cartridge filling • Two-component adhesive repackaging • high-viscosity material dispensing • Industrial adhesive filling • Precision chemical packaging
Semi-Automatic Dual Cartridge Filling Capping Machine for 250ml 10:1 High-viscosity Adhesives | WEFILL-CAR-F005
Read More
